Oscilloscopes Analog

• 100 MHz 2 channels
• 5 mV...5 V/div (±3%)
• 20 ns... 200 ms/div (±4%)
• External dividers 1:10 (Y)
• Expansion x10 (X)
• Triggering int, ext, line
• X-Y mode, Calibrator
• Z-input, brightness control
• Z-output, timebase pulse
• Component tester
• Screen 80x100 mm
• Dimensions: 160x300x380 mm
• Weight: 8 kg
• Power: 230 VAC, 80 VА

• 100 MHz 2 channels
• Oscilloscope + ADC
• For oscilloscope parameters refer to С1-157
• ADC parameters:
• 2 channelа, 8 bit, 512 bytes/channel
• Bandpass10 MHz
• Sampling rate50 MHz
• Triggering 1 μs...20 s/div
• Pretriggering 100% of screen
• Cursor measurements DV, DT
• Single shot signal recordal
• Recorder mode (drift recordal)
• Digital indication on CRT

• Oscilloscope С1-157/2
• 100 MHz 2 channels
• Oscilloscope + multimeter
• For oscilloscope parameters refer to С1-157
• Multimeter parameters:
• range VDC VAC: 1 mV–500 V
• Accuracy 0.1% (VDC); 0.3%–1% (VAC 40 Hz–100 kHz)
• Range IAC, IDC: 1 мА–2А
• Accuracy: 0.25% (IAC); 0.5% (IDC 40 Hz–5 kHz)
• Range R: 1 Ohm–1 МOhm
• Accuracy R: 0.2%
• 3 ½ Indicator
• Autoranging

• 25 MHz 2 channels
• 2 mV...10 V/div (±3%)
• 0.1 μs...100 ms/div (±4%)
• External dividers1:10 (Y)
• Expansion x10 (X)
• Triggering int, ext, line
• X-Y mode, Calibrator
• Z-input, brightness control
• Z-output, timebase pulse
• Component tester
• Screen 80x100 mm
• Dimensions: 140x300x380 mm
• Weight: 8 kg
• Power: 220 VAC, 80 VА

• 25 MHz 2 channels
• Oscilloscope + ADC
• For oscilloscope parameters refer to С1-167
• ADC parameters:
• 2 channels, 64 Kb/channel
• Bandpass10 MHz
• Sampling rate100 MHz
• Timebase 10 ns...10 s/div
• Pretriggering 100% of memory

• 25 MHz 2 channels
• Oscilloscope +multimeter
• For oscilloscope parameters refer to С1-167
• Multimeter parameters:
• Range VDC, VAC: 1 mV–500 V
• Accuracy 0.1% (VDC); 0.3%–1% (VAC 40 Hz–100 kHz)
• Range IDC, IAC: 1 мА–2 А

В стадии наполнения

В стадии наполнения

В стадии наполнения

В стадии наполнения